He doesn't know wut hes doin.  He used 2 people & doesn't realize there's tire bead lube for mounting.  When his water solution of dawn rusts out the inside of rim, hell understand.

Great video! Thank you for your purchase! I’m glad the attachment worked out for you. Lowest profile I’ve done is a 225/40/18 and that also required two people.

Thanks

Great video thanks

double layer painters masking tape also works on protecting the lip

Good teamwork. Smart the way you did it.

Thanks for sharing. The wheels look great!

Nice job guys!  Cool upgrade to the Corvette 👍

Dude I have the same size tires and I can not get them off. I can’t get the tire over the lip. I’ve made sure the whole bottom bead is off and no matter what I do I can’t get it up over the lip

Well, it finally worked for me.....a low pro tire on a 19x9" rim.
The tire spoon following the duckhead actually works to re-install a tire.
Too bad it took me all day before I figured it out!
I got one tire done in 7 hours! 😂😂😂
Thanks for the tips! 👍

Great video and thanks for sharing! I used a bubble balancer also to balance my tires and it worked great but before I used it I did the modification on it where you drill out the hole where the pin sits and it makes it move freely. There's vids on how to here on YouTube

Great video but I would recommend some tire lube I use Murphy’s tire mounting compound and it works great i just mix in a little bit with some water and it’s way more slippery than dish soap makes it a lot easier to get the tire on

Maybe put an old rag between the wheel and the tightener cone/tube thing to help prevent scratches otherwise looked very smooth nice job , thanks for the video going to put a tire on today wish me luck

yours looks so much fancier than mine (stock for stock).  I'm going to have to look into upgrading mine because I've just used brute strength and aggression to change tires

Great DIY but please share what you used thanks

You think you could do 30 side wall low profiles? thks !

Hi please post up the links in the description of the extra modification parts needed, amazon or what ever. (cone, ducked head, lucid adapter, etc) Thanks.

Nice work. You make manual labor look easy. 😅 They'll look great.

4:30 half - yes half - the directional tires I've had professionally mounted were put on wrong and I had to take back and have them flipped  SMDH

I can never seem to get the tire to pop so I can inflate it without using fire. I’ve tried lifting up. I’ve tried a ratchet strap. Nothing seems to work for me except for fire and it’s super easy. I set the tire on the ground and spray a little brake parts cleaner inside of the tire then I’ll make a wick over the tire and onto the floor and then light it, kick the tire a couple times and voila it’s done. Until I find an easier way for me, this is the way I’m going to keep doing it.