After watching this video I went out and bought one of these .Now my wheel horse tractor has new tires that replaced to ones that were 46 years old .Thanks for making this video otherwise I would have never known this tool was any good .

Great explanation👍thanks

😂more of a COMEDY skit than a tutorial!

Bought mine yesterday from HF with 20% coupon. Worth every penny! Had to install 6 inch tires on 50cc quad wheels. First too with no tire changer. After many F bombs, I found out about this Mini Tire Changer and bought it immediately. No F bombs anymore. Lol. For the record, I'd rather be busting 37s on a 4x4 than 6 inch tires for this tool.🤣

I like your idea of mounting the HF Mini Tire Machine to a old wheel and setting the wheel in your rim clamp tire machine to hold it steady. You have given me the same thought of doing the same thing with mine. Usually when I use mine it is not often and I just set it in a vise.

Good vid bro

Very Cool Video Nicely Done My Friend 👍🏼😎

Use soapy water and HUG the tire...   It worked for me....

You guys make it look so easy peeling away tire off rim and then mounting.  Try it on a 4 ply tire and see how hard you need to work tire on rim, its hard.

I've got to get one of them.

I did the same for the first time on similar tires for a zero turn, MUCH more difficult for me on the first one and the inside diameter of the tire measured 7 1/2 instead of 8" like it said it was. Second was easier after a little learning curve and plenty of lube ( thats what she said ). Then it wouldn't seat for the life of me,  remembered someone spraying starting fluid. Sprayed 2 shots in there and lit a lighter,  boom yow,   went right on.

I think we need to do a couple dozen of these tire changes to get a good system down, then make a video.      I just did a couple tires and it was exhausting for me.    I don't know what I'm doing yet.

I have broken beads on both sides of a 20X8X8 with no problem

i've done tractor tire installs all the time using just a full sized tire machine. i never needed a mini tire setup. if the tires weren't warmed and still stiff, i used a cheetah tank to blow the tires up and everything else like normal. if i didn't have the cheetah tank, i used ratchet straps to force the bead out enough to expand to the rim beadlock.

I have used it to break the bead on my scag 24x9.50-12.  Getting seal the bead was a different story as tires were shipped compacted

Saw someone mount one on a reciever hitch

Just stand up the tire on the ground and while turning the tire slowly bounce it up and down few times to set the bead

I would make one> Guess i could make the tools also .  A ball bearing on 1 1/2" steal rod, 2 rods welded togather,  square tubing with flat bar.  buy some lock pins

I don’t know what the center threaded section is . If it is say 1”-8 or what. Is it easy to remove? Buy a piece of all thread that size but make it 5” longer or a coupler and a piece of all thread but doing that you might not be able to tighten it down ! You can change it out that way!

You think this will work for a 10.5" tire for scooters?