Great guide man. Super easy to hear the instructions, see the information and generally understand. Really appreciate the quality of information delivery.

Great job! - Newbies like myself appreciate the clear and uncomplicated explanation.

Nice video!! Great narration, concise, easy to follow. Professional quality production.  Very helpful. Thanks :)

Doug, good overview of the Penoff software. Folks need to watch out for some ebay programming cables, my buddy got a miswired one and it blew my BBSHD controller as soon as I plugged it into my bike. Never had any issues with the programming cable I bought from Luna. Nice Stab Garbanzo, I have been jamming on a 2007 Stab Deluxe with a hot-rodded BBSHD from Luna for the past couple of years, also with white wheels. The Stab is definitely a bike that can handle everything the BBSHD can put out, no flexing or wobblies. I was advised to get the 36 tooth Lekkie narrow-wide chainring, and ditching the stamped steel Bafang chainring before I ordered my BBSHD kit. With a 9-speed 11-34 cogset it goes anywhere. Even with 3 big screws mounting the battery rack to the frame (your "riv-nuts" are a great idea), I have been using two nylon & Velcro straps to keep my battery secure, but as you said in your build video,  the under-downtube mounting keeps the center of gravity low for stability.

I think the current consensus is that the "Speed Limit%" is a limit on the BBS motor speed (rpms) rather than the road speed.  It affects at what cadence the motor stops providing assistance.  The maximum rpm (at the cranks) for a bbshd is 130-150 rpm (depending on voltage).  So the Speed Limit% should be set to a level that assures that it doesn't start cutting off or ramping down before you reach your normal or somewhat above normal cadence.  These motors like to run at high rpms and putting too much power in at low rpms can cause them to overheat, especially the BBS01 and 02.  The HD has much greater heat dissipation ability and is much more "bulletproof" I hear.

The most informative video I've seen, and I've seen a few! Thank you very much.

Very useful, thanks. I found that I needed to turn the bike battery on to be able to read the flash. In the PDF which was part of the config tool download it says specifically don't have the battery connected when connecting a computer.

Excellent clear concise video. Thank you.

Great instructional video Doug! Straight to the point!

good job. brief and to the point.

Great vid, thanks for covering this!

Doug you have to take off the plastic shipping cover on the display!  Very helpful vids man

You can't set the current limit higher than the value detected (the one you see on the right). This was done to avoid errors. If you send the controller higher value, it returns an error. That's why I programmed it to limit like that. That my config program by the way. :) I think I should make a newer one that has better compatibility with Win10 and I might try to add functionality for the new mid drives with torque sensor if I figure out how it works.

The speeed app for an android phone works great and no dicking around plug and play!

Gonna try for first time. Thanks!

Thank you!

Good Video :) Thanks

Very nice and informative video - thx!!

sweet thanks bro Im getting one next week

Nice, precise 👌🏻informative!🙌🙌👏👏👍