Wasn't that...the problem was. You have to reset the AR7210BX....I tried everything...finally I figured it out...had nothing to do with the radio...but thank you for replying to my question.  That's good service...keep up the good work

I easily understand after watching this video 2x . I am not calling anyone out but those who dislike your video are the ones who don’t understand. some people might never understand it and for those who don’t understand shouldn’t be flying helicopters for public safety. Great video man, this has helped me out a lot. The new blade 330s receiver channel is limited and I’m putting my helicopter in a scale body with retracts. 7 channel receiver is perfect 👌 and I have installed the AR7210 just by watching your video, thank you 🙏 a lot

Hey thank you so much.  I just tore down my heli for a rebuild with upgrades and I had never changed anything on the BeastX.  This was a big help to get it running properly again!

Brilliant Video Sir!

Awesome video Tony. Thanks for taking the time to explain the Beast. I have been looking at different Gyros and this video just just made up my mind for me! At first when I was reading about the AR7210BX it was very daunting to me, but after watching your video it helped me to understand a great deal more about this particular unit. Once again, thanks for sharing your knowledge and expertise in this Hobby

FYI for those with an AR7210BX that came on your Blade heli: It has some menus locked so you cannot transfer it to a different heli. This is done intentially by Blade. This information was confirmed by the company. You may be able to purchase an unlock key of some sort if you want it fully unlocked.

I'm just a beginner flyer i cras my 450 heli using same gyro and Remote dx9 spectrum I gonna build again and want to back in the air watching from Canada

Fantastic vid. mate! Minute point, the speed of the servos are measured in "micro seconds" and that is the symbol for micro, which is similar to a "u" but has a long tail on the left hand side!!

You want get the blue light in the limit menu.ive tried the servo. The balls on the servo arms jam into the servos.on the 470l and 450l it's the way the servo design in the frame .450 proud made  different.

Is this the same setup process for the SPEKTRUM AR7210?

Is AR7200bx of Blade CFX300 has the exactly the same way to setup?

My throttle is not working from the get go. Needed to reverse pitch and throttle? Get no reaction from the motor. Reset unit nothing works, initialises fine with tones on the motor. But that's it, next no throttle

I got a dx7s and the heli gyro is already setup but isk what settings to use for the radio im a noob always used rtf heli xk110 and v950 and my drone only uses default settings no mixing etc because the flight computer does it all

I need help with the tail endpoints. It wont seem to save where I set the endpoints at. When I exit the setup menu it just goes back to the default endpoint setting( which is very little)

Someone plesse help me. My problem I get is right after binding. My motor runs up..This is absolutely weird...why is this happening?

Another gyro set up that doesn’t work , I can’t be asked with helix’s anymore going back to planes

I have a Trex 500 with a Flybarless head on it and a AR7300 BX receiver on it. At 50 in and 50 out I have 0 degrees on the blades. And 12 degrees at positive and 12 degrees negative pitch and 6 degrees side click and about 8 degrees on the other blade and all the servos are at 90 degrees. How do I get them both side clicks the same. I'm not getting any lift at all on the helicopter. I don`t know what to do. At half stick the helicopter is not lifting at all.

I set up my ar7200bx on my trex 450 and the gyro is not holding the helicopter tail using my spectrum DX8. did I miss something in the setup.

did not worked for 450 align

I have a problem I got a trex450 and setup my end point on my tail servo and put my transmitter to 150% on my rudders on transmitter but it only moves like 30% causing the heli to spin like crazy helo