OpenTube

How To Replace Rear Brake Pads N Rotors 2018 Lexus NX 300 With Electronic Parking Brake

JM Auto Repair

53,114 views

2018 Lexus NX300 rear brake job featuring a complete brake pads and rotors swap! This detailed guide covers how to safely retract the Electronic Parking Brake (EPB) into service mode without specialized scan tools. Eliminate rear brake squeal, fix pedal pulsation, and restore factory stopping power.

RECOMMENDED TOOLS & PARTS:
EPB ACTUATOR: https://amzn.to/4uO4f2U
REAR & FRONT BRAKES PADS & ROTORS: https://amzn.to/4voASW2
WRENCH SET: https://amzn.to/4e8QYgO LONG HANDLE 1/2 DR FLEX HEAD RATCHET: https://amzn.to/48lsbSZ MILWAUKEE 1400 LBS IMPACT GUN: https://amzn.to/4vyZcVY NEIKO 3/8 SOCKET SET: https://amzn.to/4ssak4e BOEN 1/2 DRIVE SOCK SET: https://amzn.to/4dELUR8 GEARWRENCH RATCHETS SET: https://amzn.to/4cj1iAq MILWAUKEE 3/8 CORDLESS RATCHET: https://amzn.to/4swdcgl MULTIMETER: https://amzn.to/42gFhgO 12V-24V POWER PROBE: https://amzn.to/4cCqPFZ
AS AN AMAZON ASSOCIATE I EARN FROM QUALIFYING PURCHASES.

CONTENT FOR EDUCATIONAL PURPOSES ONLY, ALWAYS FOLLOW MUNUFACTURER PROCEDURE.

#ElectronicParkingBrake #EPB #BrakeServiceMode #LexusTech #RearBrakes

20 Comments

@bobbenoit8470 2 months ago

I want to thank you for that valuable video. I build houses; I am not a mechanic but I managed to change the brakes on my 2018 Lexus. The battery "trick" to disengage the parking brake was so valuable. Thanks so much!

@CruzHernandez-mj8yc 2 years ago

Thank you for this video, knocked out my brakes in 40 mins. Was alot of help

@garyl4007 7 months ago

This is the only way to do a 2019 Lexus NX. Works like a champ!

@denisebrown9248 2 years ago

Great informative video. Used portable power station to loosen brakes. Removed, then ran ea brake out till boot was smooth. Cleaned, then pushed back in w brake compressor tool. Boot realigned smoothly. Thanks for the info, very helpful.

@theCybershot123 3 years ago

Thanks for a good video on this subject

@quytran6974 2 years ago

Thank you bro!

@chrissole4729 7 days ago

The malfunction message register itself in the computer chip. You MUST use scanner to reset it.
So, better you mentioning in the beginning before you start the job, to put parking brake into maintenance.

@soyeldiego86 2 years ago

Thank you man

@kimquyluu6771 4 years ago

Thank you share clip

@Gerald-r6o 2 years ago

Great video, straight to the point. Thank you for your time making it!!!!!!

@samchhoeung2578 1 year ago

Great job !! I own 2019 NX300 , I want to bring my car in your shop if close enough. Can I have your location, please ?

@JerseyPhillyScott 1 year ago

Just get a tork key and turn it while u push the piston back

@chrissole4729 7 days ago

What you did not cover is the message malfunction. It won’t go away by itself. How did you reset it?

@martinmoreno4333 1 year ago

How to put back the piston I accidentally came out

@harveymagsambol 3 years ago

Thanks for the video so very helpful, where and how to make that cable going to 12v to the parking brake? Thanks a lot🙏

@ThePikmin18 4 years ago

Hey why didn’t you just do the brake release procedure to loosen the rear brakes off?

@ghggg34-w5n 11 months ago

Hi..can I use a caliper spreader to push back the piston instead of using the 12 v battery as you did?

@MrVanchu 3 years ago

On the passenger side the rear wheel, which one is positive and which one is negative? Is it same in your video?

@user-wc3tz3be1j 1 year ago

Cant u just put it on maintenance mode and press that pistons in?

@bigeazy02 2 years ago

Hey there my brother. Thank u for an awesome Vid. I want to ask you about a 2004 Monte Carlo LS. It cranks up but dies in 2 seconds. Any idea to lead me in right direction??