Watching MK shrink up after all your tacking and laying everything out just so was always the fun part for me.

A hair dryer doesn't get hot enough and a paint stripper is too hot!  A "Monokote" heatgun is just right.

Thanks for upload

All monocots states is 250 for tacking. Then nor further for shrinking with the iron.
Played with the heat gun. Your right with that you can look to see matrial change then remove the heat and see where it goes.
Best quiite I read  
The shrinkage happens from cooling Not the heat

Brodack company has everything ! 😢 it is an all control line airplane company, 😅

Sorry for typos

I recently covered a plane and this would have been nice to know.

Larry,
Are you using a "Monokote Heat Gun" or something else ?  Please advise and thank you for your time. Great video by the way ..

On what number should the sealing iron be set on.4?And would a heatgun from Lowes be adequete and at what heat setting should it be used?

would a hot hair dryer work for this, or would a paint stripper be good if used on low and at a distance?

hi sir i want to buy same your heatgun tell me shop address or online link etc?

Can you give the temps used for the different tacking and shrinking steps?

H

You stopped talking - we see what's going on, but not why.