❤

Hello, it’s great to see you again. I’m very glad that you’ve provided a more detailed introduction focused on the core products in your video, which has helped resolve some of my own reasoning and assumptions.

I’d like to ask a few questions regarding the subwoofer setup shown in the video. In my current configuration, the Beosound Theatre is used as the center speaker, with a pair of Beolab 8s placed at the left and right front.

1.Within the Beosound Theatre itself, is it sufficient to assign only one of its internal front drivers (either the left-front or the right-front driver inside the Theatre) to act as the subwoofer?

2.Under this listening configuration, if the Theatre remains the center but its role is disabled in Music mode, will the Beolab 8s then output as a stereo setup? (Because within this three-device linkage, it’s not possible to directly connect the Beolab 8s as a stereo pair without losing the listening position role.)

3.Regarding the redefinition of levels in bass management, what would you recommend for the crossover point under this system configuration? Is increasing the dB level of the Theatre or the Beolab 8s a valid reference for adjusting the proportion of low-frequency output? Is there a more concrete reference ratio or numerical guideline?

Thank you again for your video. I truly believe it will help many buyers gain much clearer insight into system setup and configuration.

Hi
Thank you very much for an informative video 😀👍🏻 one question - what’s the purpose for changing BL 8 from surround to rear ? ( I have the exact same setup an mine are per default set as surroundsound )

Can a pair of beolab 8s be connected to beolab 19 using a Beoconnect core to form a 2.1 configuration?

Good video.

Are there currently any deals to be had on the theatre? 👀

I am so colosally tempted to order a pair of 28s as front left and right, but B&O says the Theatre is good enough alone as a start? I dream about Beolabs a bit too much. But I don't dream about a remote, I like LG's cursor a bit too much!

Can I deactivate wifi and bluetooth, or must they be activated when I want to change listening position if one is already installed?

Do you have to have an LG tv?  I’m getting a new Sony 9 mark2  , will it still work?

Nice video. You briefly mentioned acoustic compensation I think, I would be interested to know if the theatre does this (ie try to compensate for the frequency characteristics of the room it is placed in), and if the new Premiere is just as capable as the theatre in that respect?

Very much needed video because no one else goes to this length to my knowledge on YouTube. I would love a follow-up video of the more detailed tweaks. For example, would it be comparable to ditch the subwoofer role and instead set up both front drivers with the centre role? I’ve also heard the Theatre can change the sound signature of a speaker once the speaker is added to the Theatre. For example, a pair of Lab 8s sound different in a stereo setup on their own compared to them set up as a stereo pair as a Theatre listening position. Can this be eliminated in a Theatre setup? The reason I am hesitant to use my 8s in a Theatre setup is because of this. I love the sound of the 8s on their own.

Brilliant. Love it when your new video drops 💥

Great vlog as always,Just a note, spending that amount of money is fitting and set up included in the purchase to look after your customers for further future purchases ..

Why setting the 8’s as rears and not leaving them to act as surrounds (as the system did)?