Thanks Mate, I have same problem. I pull out the pedal and do the adjustment in the screw and it works. I have fiat 500C.

Dualogic isn't great when it goes wrong, your video is very a helpful.

Stevie, you absolute legend!!!!


It worked. My uncle asked me to have a look at his fiat Panda Panda semi auto, because itwouldn't go into neutral. He was quoted £800 at the local garage. I was just searching lots of forums and found your video. Adjusted the screws to make it center, and its working again.

Thank you again!!

Hi Steve, i have same problem but on reverse gear....your theory solve my problem. Thanks a lot !

Thanks for the video. It really opened my eyes. Good work !

You absolute star! Saw this yesterday, son's car having same problem, got a replacement pedal and now it's all fixed!!! Thank you for sharing.

Thank you soo much. I have a 2013 that Fiat here in NZ my issue of not selecting neutral when I stop. I asked for Fiat here for a accelerator unit  cost over $700 NZ or almost 350 pound. I found one at a wreckers for equiv 100 pound from a 65000km car. Worked perfectly!!!! Thanks again. great work.

One can see that the screws up.left and down.right are moved a bit out of their original position. That makes the difference.

Hi guys any feedback on this theory?

Hello, can someone help please, i have a fiat panda it does not change gears its stuck in 1 and it cant start because its an automatic car.. i have tried to change gearbox but the problem persists. Any suggestions? Could it be something to do with the pedal as well? Your help will be appreciated..

I have a 2012 cluster is showing 1 , with visit dealership message and won’t move to anything else , stick moves but nothing changes , and car won’t start , any suggestion?

IF HAVE PROBLEM MOVE TO R
CHANGE PADL FIX IT ?

I have problems with my fiat ducato diesel 3.0 2016 couldn’t get out of first gear open driver door also no priming pressure pump sound check all fuse and connect all perfect only have 1 fault code is P181079 on transmissions fault 😭

Do you remember the size of the 3 nut to put pedal off?

Hello how are you? My car has the other side drive (left side). Just to be sure, pedal in the video adjusted was the  accelerator pedal right? I will try it

Did you have problemany problem with the fuse 3 times i change the fuse then the fuse is ok but the gear is stuck on R(sorry for my English)..

Hi. I have a Lancia Musa 2006 1.3 diesel automatic. Sometimes gives me an error gearbox failed for 2 sec and then disappear. This message always comes when is 2d gear. It pops up for 3-4 sec and then disappear. Car change gears normal. Only when message pops up won't go from 2nd to 3nd. Only for this 2 sec. The obd error is P1742.
After some days watching the problem i see that message pops up when car is in 2nd gear and wont go to 3d until message disappear. Then it works fine. Same when car is in 2nd and going to 1st.
Can you help please May yoy please ask this guy from Italy?. Thanks inadvance.

Thx informative. I haven’t had this problem but I had a one Time issue that my 500 didn’t want to turn over. It’s an automatic transmission and the tow truck driver put my car in neutral and it started up!!??! It’s never happened since. Had it checked out and no error codes were present? I’ll keep ur video in mind Incase it happens again. Thx

My car will start and is In neutral but when I select gear 1 auto it says unavailable and have to keep restarting car ? Any ideas

I don't understand how does adjusting the pedal can fix the problem?