OpenTube

Testing a chinese sickle-bar

Torkelsen

3,472 views

Testing and reviewing a Chinese sickle bar mower for excavators.

And here's a Chinese breaker test: Hammering out a parking space with a Chine...

Music attribution:
Music track: Show Yourself by Orchestronika
Source: https://freetouse.com/music
No Copyright Music for Video (Free)

Music track: Blacksmith by Conquest
Source: https://freetouse.com/music
Royalty Free Music for Videos (Safe)

Music track: Feel The Storm by Orchestronika
Source: https://freetouse.com/music
Vlog Music for Video (Free Download)

Music track: Power of Nature by Orchestronika
Source: https://freetouse.com/music
Royalty Free Music for Video (Safe)

Music track: Horizons by Alegend
Source: https://freetouse.com/music
Free Vlog Music Without Copyright

9 Comments

@paulweser 8 hours ago

Your videos are really great. Thanks for showing them—both the problems and the solutions.😊Greetings from Germany.

@sky-guy3049 1 hour ago

I ruined the seal in a couple flat face couplers on my R322L until I discovered using a block of wood to keep the floor pedal depressed to allow fluid to move thru the circuit when trying to attach. One side would usually go on no problem, but the other side was too pressurized. It wasn't always the same side either so I would have to change direction I was holding the pedal while attaching the coupler. BTW- I too upgraded to a bigger machine; I LOVE my XCMG (Xe27U).

@zeusolympios298 8 hours ago (edited)

Nice videos 👍🏼
In my opinion a mulcher attachment would be faster, more efficient and with less problems for those kind of works.
Do you have and video working with the hydraulic breaker?
Greetings from Hellas🇬🇷

@daleotto5748 8 hours ago

They make a flat face connector that you release the pressure on the connector and then no pressure on the connectors

@MatsN 8 hours ago

Itś made for cutting grass, not branches.

@daleotto5748 8 hours ago

You can reverse the aromatic hitch and connect it on the opposite side with the quick connect is reversible and same with all other attachments to lift under air tunnel with your bucket or cut the lower side and the top side of the bushes

@Thegreatmaster11 10 hours ago

Hey brother there’s a pressure relief screw on top of the hydraulic tank. Before you try and connect the fittings unscrew it and it will be much easier to connect the fittings. Alternatively you can move the pilot and all the other controls while the machine is turned off and it will relieve the pressure also

@daleotto5748 8 hours ago

Need to open the circuit the pedal not the handles the circuit for the attachment with the motor off it helps to have all pressure off and the cylinders relaxed it up the gravity pushing the cylinder will add pressure to the system the most important is the pedal

@TTwrecker2 7 hours ago

I don`t know what kind of hydraulic pressure you working with. I have seen you have leak problems. I have a diving tank with 300 bars of airpressure. Nylon seals are the only seals that keep tight. They come in all sizes and profiles.