Can’t wait to see the series, would love to see it tricked out with silent parts and a suppressor, could be my new rifle !

Speaking for your german friends here.
This version will be the best you can get for that price.
Get this version + the Stalker Ultimative upgrade-kit, put the green Stalker anti shock rubber pad in it and use a silencer (Sniper Mechanic Hexx Suppressor by far the best), you will land at around 550€. For that price you will get one of the most silent sniper rifles out there. Due to its barrel length of 330mm you will have a little less range in comparison to the standart Tac-41 (510mm barrel length), still you will get consistent shots at ~70m. But if you keep in mind that this version is 200€ cheaper than the standart, it is a good compromise.

Looks like a great build!

What i see on a friend tac ls and we can see it on yours at the end of the video. If you look on the 3rd mlock slot  bb are exposed on the outside element when there betwen the feed ramp and the hop up.  I don't know if it can be an issue but is it possible that forest debris are comming in the gun?  Not as much as it was possible on the striker as01 with the wide open on the cylinder. But if we take a look most airsoft sniper are running closed

about folding stock in that tac 41 please..😊

Any Chance On More AAP-01 Content . Just Bought One And Plan On Building It Out . But Great Videos , Love What You Do Keep It Up Mate

Would be cool with a carbonfiber barrel 🤔

Maybe this is helpful to someone, cause it would have been useful to me, and after watching all the reviews i could about this replica (this is the best series by far anyways) nobody said this before, don´t buy the polymer receiver version, the bolt is extremly loose inside the receiver, like 2mm all around the bolt, AND there are not guide rings inside the receiver, you cant change them, you cant make the receiver-bolt interaction tighter, you have to be really, really careful to pull the bolt in again after cocking it as straight as you can to ensure you are not damaging the nozzle or the hop up chamber, i can feel how the nozzle struggles to enter inside the chamber....
I will try to find my way to drill 2 chanels inside the plastic receiver so i can try to install some o-rings to acomodate the bolt tighter, and if i fail... i will buy a separate aluminun receiver because my plan was to buy the stalker guide rings wich are tighter than the original ones, cant be done ^^
Maybe some type of teflon armaflex tape will do the work.....

Hello, I’m very undecided between L and LS, any recommendations?😂 I would like to use .30-.40bb, to set up like 2,5J

do you need to replace the nozzle return spring on the gm 416 like the tm mws?

I got one of these recently but came with two extra springs both saying 120 on them if I put these in will it make my rif too powerful is there a guide on the joules that it will change it to with out the hassle of actually changing the spring ?

No steel internals?

I don't like the p stock. I prefer the pellet gun look

Didnt pay for any of them but still moaned, typical Pom behaviour.