⸻

“I’m so glad I came across this video tutorial—perfect timing! I just bought an iKON2 FBL and an XDFly HPro 195A 6–14S SBEC ESC, and I’ll definitely need to go through this initial setup for my Goosky RS-7. Thanks so much for putting this together!”

Thank you I watch all  your vedios often great help well done

Listen I don't care how old this vid is. I have been out of the game for awhile and you saved my life. It works. Thanks alot. You are the man.

Thanks Freddy, good info. Followed your procedure with IKON 2/BRAIN 2 with success.

Thanks for a brilliant video. Followed it all the way through and it worked fine - EXCEPT for one thing, i.e. my throttle hold didnt work. It reduced the speed but didn't stop it completely. Spent ages trying to work out why this was and re-did the procedure several times. In the end realised that that the throttle trim on my DX7 has to be a mid point. If you have the trim all the way down (which is what I though you were supposed to do with electric helis), then the throttle hold doesnt actually hold!

Freddy, you could use a servo extension and remove the positive lead from the extension that way your not risking damaging the connector on the ESC throttle lead.

Nice video Freddy  with hobby platinum series is it necessary to input the yellow wire  rpm signal to beast x

Freddy your the F@#king MAN! I was scratching my head and scouring the interweb for this information, with no luck. This video sorted me out in minutes! Thank you as always! (Futaba pilot) Looking forward to new content

Awsome Freddy it worked for my ar7210bx like a charm!! Thanks!!!

Freddy thank You so much, extremly helpful for me as Spektrum Pilot using MIKROBEAST I got alredy krasy, while I culdent get the corekt setup for my HobbyWing Controller. Realy great Job and it works perfekt! Best regards from Germany MIKE

Your videos rock. I have been stuck on this exact problem  all day. I forgot I watched this months ago

Brilliant work Freddy     I always learn from you on each video much appreciated again al

Awesome  video. Been fighting  this on all my builds over the years. Thank you sir.

Thank you Freddy

Very Helpful

Thank you so much. You just saved my day

Cordova, while you posted this a while ago, you are always a big help. I have a Goosky RS4 Venom that comes with their GTS FBL unit and the new HW Platinum 80A ESC. I tried pulling the red wire out on the ESC, but it did not work like your demo here…. so I took a separate Radiomaster R88 PWM receiver and calibrated the ESC that way. Have you ever done throttle calibration that way? This was recommended to me by somebody with the same set up and it seems to work fine as I got the exact same beeps that you got. When I remove the red wire from the ESC simply nothing happened.

Nice video.

That's exactly what I'm gonna do  With a servo extension wire,,when I get home from work  Tonight

Glad you worked this out Freddy, you’d think following the Align manual and an Align/Enteprise Hobbies video would get you results but no, just frustration. I don’t know how the heck you figured this out but thank you. You’ve helped us all so much in the past but this video here is gold. Anyway, I followed your instructions and things are now working as they should on the bench. I’ll be taking my Trex 500X out for my maiden flight today thanks to you.