100% best video for installing a bottom drain....

Great tips and they worked flawlessly in my installation,  I even used the same Loctite  PL Roof and Flashing sealant as you did in this video, so after I installed the bottom drain I read the label on the tube of Loctite and a couple of things stood out, that being it has a 7 day cure time and it's not recommended for under water use although the majority of sealant is actually sandwiched between the flange on the underside of the liner there is the sealant that is exposed between the bottom drain and liner at the drain opening. I hope this stuff works as well as your advice on everything else.

So many killer tips brother! Thanks #HelixNation

Top tips, thank you.

Hi Pond diggers,
Love all your videos..Made very nice.. I have a issue with new concrete pool. I've treated with vinegar for a week and other treatment but still high PH. 9+ all the time. I have a few tester fish and they're not doing good. I have mortar rocks on the inside of pond touching the water and believe this is the problem. I want to put a liner all the way to the top of the inside of pond over the mortar rocks. Should i leave it the way it is and hopefully the ph would go down naturally or add liner?

the drill is what i need

Hi,
Enjoyed your video. Please could you explain where did the bottom pipes come from to attach the drain to the filters?

What is the exact sealant you use. Love your videos.

have you ever experience. or have a homeowner complain about mole or a rat digging up hole through the liner, and cause a leak?

If I use a liner and rock the bottom of my pond, will a bottom drain still work affectively?

Love your tips and tricks and the fact that you share them!

Where does the bottom drain drain too?

Sir i need information about linear used i want to buy that kind of liner u have used

What is the sealant you use. Loctite PL something?

So how do you drain the pond?

Could I use no nails?

These video´s are great, thank you.

Here is a little hint that might be a bit helpful for you.
when you are using sealent anywhere and allmost anykind you can dip your finger in dishwashing soap ( for manual washing dishes )
mix a big part soap and water, and dip your finger in it.. then smooth out the sealent.
- now the sealent wont stick to your fingers, and  you can make it look alot better ;)

you can also spray the soapwater on areas you dont want the sealent to stick to before you smooth it out.

How long do I need to wait until I add water after drain installation? I used the same sealant you use (S30)

Don't use these PL flashing stuff. Use silicone, or marine grade silicone.

I am a manufacturer of Pond Liner. I can give you a comprehensive explanation on the installation of Pond Liner, size，materials and costs.