OpenTube

22 SHOT FX Dreamline Sticking Magazine Fix / Damaged Pellets / Modification

JERRY irwin

13,329 views

SORRY FOR ANY ADVERTS.. I HAVE NO CONTRIOL OVER ADVERTS AND EARN NO MONEY.
This video explains the in built problems with this magazine and the fixes required to rectify.
Contact me on jerry.irwin@homecall.co.uk if you require a modified new cover or any questions..
Please see EXTRA added video called :
'Part 2 of 22 SHOT FX Dreamline Magazine'
The new cover IS now available in SIX different colours,.....
BLUE, GREY, BLACK, GREEN, RED and ORANGE..
I can post to anywhere in the world but cost is more outside of UK.. Thanks for watching..

17 Comments

@jk_46 3 years ago (edited)

I made the mistake of leaving my mag loaded for more than a year before using it again and the spring tension was non existent. Had to open mine up to give it tension but the video helped none the less thank you

@ruimartins44 4 years ago

Very useful video with all tips and tricks to assemble an FX dreamline/wildcat/streamline/crown magazine ! I was able to repair my magazine following this steps, congratulations and thank you.! this video is a mandatory for Fx owners, well done!

@alansmith9080 4 years ago

My .22 Mag Dreamline was jamming and misfeeding since it fell apart in use, Luckily no parts were lost. I found your video really helpful in the taking apart and puting it back together again as it had as i suspected grit between the rotor and body causing it to jam. Not a very good design these mags considering it is supposed to be a quality rifle. I am deeply grateful for the clear helpful video, many thanks. Alan

@kallemlink 2 years ago

Brilliant absolutely brilliant

@rieme028 2 years ago

good and brilliant

@arthurjames9813 4 years ago

Brilliant! an answer to an annoying problem, Have just emailed you to purchase one.

@style22al 4 years ago

Quality product, does exactly as it's supposed to and finished off nicely. No burrs or sharp edges. Highly recommend them. Cheers Jerry 👍

@gmatos123 5 years ago

Awesome video, thank you for the information

@kallemlink 2 years ago

So how do you order the plate

@shinalight61 3 years ago

hi do you still have mag modification for a fx crown m2

@davidstead4290 5 years ago

Fantastic video thankyou

@brianherron3248 4 years ago

Sent you an email Jerry

@jackdaw3160 4 years ago

Have a m3 impact do you do covers for them

@probjones 5 years ago

Hi Jerry, would these work with the .22 18 shot magazines?

@scottkelly379 3 years ago

Jerry ,great design you've made, I'm having the same problem with my fx maverick which I bought about 1 month ago , how do I contact you to buy 1 of your magazine plate covers ?

@alansmith9080 4 years ago

Hi any advice on how to stop the nut on Dreamline magazine from undoing in use. If I tighten the nut too much the mag jams solid if you leave it just so the mag cycles down as it should when loading the pellets the nut uncrews and falls out from the bottom and with it you risk loosing the little ball bearings and springs. I had thought of a tad of locktight but then getting the mag apart for maintainence stops that idea.

@darrenleighty7574 5 years ago

I have a fx wc mk3 22 cal...had to break it down yesterday to get the mag out...not happy it's brand new and hardly shot it...do you make these for the 22 cal fx wildcat? Thanks