Finally someone used caulk with Woodland Scenics raisers. That's what I'm planning.

Finely  some one that really knows  to show their  their skill's  Thank you

Excellent demonstration, Thank yoiu so much for putting this on youtube.... I am going to use these foam risers as i am tired of flat layouts....

Thanks, the risers come already tapered you can get them as 4%, 3% and 2%. They save you alot of work instead of working out the slope % and making something out of plywood. Also because my layout is portable it makes the layout lighter.

Thank you for sharing ... great job!

Great job..thanks for sharing. .I want to do something like that on my new ho layout. .

Great video! This have helped me a lot!

I've recently built a grade using the 2% grade risers. I found it easier in my case to cut a template that described the outer edge of the risers. It made it easier for me to follow my intended path instead of trying to sight a center line and guestimate how it aligned with the riser center line. After laying cork road bed and the flex track, I realized I had installed one of the risers upside down. I would not have thought this would cause problem, but it introduced a hump at one junction in the riser path. I'll be able to correct it by freeing the cork from the riser and shimming the cork for about 6 inches, but this indicates that some care should be exercised in using this product. I too used a cheap acrylic adhesive caulk to glue the risers to my foam baseboard.

What a super product.  Definitely going to use that in the future.  Thanks for a great video.

Great information I need. I subscribed.Joe's train world videos 😃😀

nice video.. i just did my risers, i myself done like to glue them down.. so many ways to do the same job.

I'm going to glue down a foam trackbed first using the acrylic sealant then lay the track on top using PVA glue. I am in the middle of making a video on lay the track down now.

Great video for unintentional ASMR

the dims are 1.8m x 1.3m. the foam risers make it easy, but 4% is to steep for the locos.

The only loco I have tried with the 4% incline is a Intermountain SD40-2W, and it handled the incline ok

I would not use 4% incline again as it causes trouble with loco getting up and the slope. sorry for my late reply

I used the Woodlands Scenics 2% riser to produce a figure 8 climb on my 009 layout. Without the WS product getting a perfectly even gradient over 16 feet would have been very difficult.

👍👍👍❤❤❤🚂🚂🚂

👍I like the risers, seem to go down pretty nice. It looks like you're using a  ridged putty knife. I have better results with a more flexible knife.  Just my opinion. Thanks for the informative video.🚂

Very informative video on the woodland riser system.  Does the risers that you show come already tapered from 0 grade and upward, or did you have to do that with some sort of form cutter.   I was considering the cookie cutter tract system but do want to cut into my roadbed.   Thanks