It was an absolute blast doing this with you lol i had a lot of fun 😂

Its like watching yourself attempt the coal power plant  for the first time again.

Next step NUCLEAR POWER PLANT 🦅🦅🦅

also, well i kinda recommend making a big fat tree farm just for things in general, perhaps make it make coke fuel if you desire it. It saved me a LOTTTTTT of times.

also there IS an "industrial ingot molder" however it is actually not that but its called the foundry, you dont need to melt ores you jsut kinda put the raw ores in there with coke fuel and water and it'll straight up output the ingots

Good luck with the Nuclear Power Plant.

The level 2 ingot molder is the foundry it's in tier 4

Love your vids on industrialist keep going ❤❤❤

btw u can clip the coal powerplant in the map walls (specificly a corner) to save a crap ton of space. because if you look closely all the inputs and outputs are on one corner of the coal powerplant, so as long as that corner is in boundary, you can save a ton of space! altough as a trade off you need some hvmt poles to climb over the walls to parkour to the entrance of the powerplant.

the CPP itself its easy when you get it, the hard part is piping, turbines and that shi, i first try everthing on sandbox and then pass it into my main world

Im new to the channel but I’m already loving your content keep doing the great work!

when you hold shift you can connect multiple power nodes at once to be faster but when you release sprint it just take the cable out of your hand also little tip : double check when placing machines so you're sure everything's right and not reverted/not running

Great job sir
Now it's time to do it 4 times more or move on to the new hell :)

love your vide mr cribs man l love your indurstialist vids bro

nice dude! if u do the NPP i suggest u do not make a RBMK style reactor. either do a PWR style or BWR style. Also u want to get the most water temp but the least thermal generation. Just watch out for high thermal generation.

i been waiting for a another video these videos are fire

He neeeeds more attention good luck

Tip for NPP. ALWAYS have the wiki open on the errors as sometimes it is required to check.

mr cribs at it again and nailed it

Yay a new video i also have a cpp and  I highly recommend use a mde to power ur farms for cpp and the cpp power

Its really easy to start a coal power plant (only if you are using 2 85mmf turbines) just turn on all of the equipment then turn exchanger steam, water and water output pressurisation to 100%.Turn on both keys (sync and ignition) then simply preheat the oven to 150 celsius, when it reaches 150 you need to turn off the preheat and put 27.5% on coal feed and 30% on air pump once it reaches 270 turn exhaust into 10% and wait for 300 celsius and then turn on the central valve which will start giving steam to the turbines (tip: you should only connect one turbine first bcz the cpp can only sync 1 at a time) then you simply wait until ONE of the turbines reaches between 3590 and 3610 rpm if its between there you apply 40% steam bypass (tip: only do it when its on the range of synchronising)(higher the better) and you sync it (synchronising only works when your rpm change is between -5.00 and 5.00 it cannot be over or under otherwise it will desync) (realistically if you do 3610 rpm you are not getting that big of a “bonus”) then you will raise the generator to 50% IF it’s somewhere like 4.70 to 4.99 otherwise it will reach over -5.00 and will desync then drop to 25% on bypass and 65% on generator then just continue wiggling it (steam bypass=lower generator=higher)=how you make 85mmf, after all of that you will disconnect the CABLE from the cpp and the turbine and attach the other turbine also press the big red button ON THE TURBINE GENERATOR now do that again and then you will have a functioning cpp (IMPORTANT SIDE NOTE: IF THE POWER BACKS UP AND THE TURBINES GET FULL OF POWER THE TURBINES WILL DESYNC IF THEY REACH 4K RPM THEY WILL MALFUNCTION*) *not explode but will stop*…