🔋Hi Guys! LiTime is going to make an 10,000$ Offer for you!🎉
⚡LITIME $10,000 BASSMASTER GIVEAWAY⚡
Share a photo or video of your boat with #LiTimeTurnBoatsElectric on FB/IG/TK/YT.  (March 3rd - 31th, 2025)
The creator of the post with the most likes is the winner!
👉Learn More: For more details and the terms & policy: https://bit.ly/4iuPJYp

WOW!, straight to-the-point, without the 'fluff'. 👍

Thank you this is useful & practical advice

Thanks for the kind information.

It was wonderfully described the common wear and tear of LiFePO4 batteries care. I liked it.

Great info I am using liTime 24v230 ah 2 in parallel to power my off-grid home for past 18 months and they have been working great my concern is the BMS the room temperature where they are stored is about 95 degrees Fahrenheit with the use of fans to cool it I keep hearing about heating the batteries .where I'm at we don't worry about that midday they're charging right at 120 amps at the bus bar from the charge controllers which gives me right at 50 amps per battery charge rate where I'm having a problem is in steady charging clouds can cause charging rate to very a lot my charge rate might go from 15 amps back up to 130 amps within a few minutes. settings 28.8 absorption 10 minutes 26.8 floot . Because the load varies as well as the charger rate I found these my best settings batteries have never been disconnected since they were hooked up or charged by anything other than the inverter or the solar panels I can't allow them to set overnight to check the balance as described in the literature I wish it had a Bluetooth BMS so I can keep an eye on the balance any suggestions

Good info! #LiTimePower

According to Eco Worthy, lead acid chargers are fine for their batteries, as long as they don't have smart features. ( de sulfation etc )

Can I run a 12v system with a charger on it. At the same time ? All of a sudden got concerned.

1:06 Yes, you indeed should not ever charge LiFePo4 when it is under 0 degrees C. But I want to add, that under 5 degrees C, you already need to drasticly lower the charge current ! As my 31kWh battery bank is equipped with a heater system, it is easy for me to prevent charging when the pack is under 8 degrees C, and have it warmed up first if it is under that 8 degrees. It is always better for the life span of your LiFePo4 (LFP) battery, to include some margin in this temperature range.

My battery charger from your company (Li)  comes with 2 mini Anderson connectors, which is awesome. So I bought two more mini Anderson connectors from eBay so I can connect it to my trolling motor and and my lead acid battery.
So easy to switch batteries, charge the lithium battery and connect my lead acid batt to trolling motor

Some top tips there!

My camper converter was upgraded to a model that can recognize LiFePO4 batteries. The converter manufacturer recommends replacing the inline 30A short stop circuit breaker with a 60A one in order for the converter to charge the battery at the high voltage.

My new 100ah 24v has a specified 28.8v fully charged. None of my chargers can get the battery above 26.6
I assume these batteries are shipped very unbalanced. Performing a capacity test today on it to ensure I am getting the full AH.

Ahhhh, i need way to charge hq 18650 40 or 30 piece power charer.

I want to have them charged under 1 hour or 2 st worst.


I dont wanna split charging over more usb charging chips and multiple curcuits, usleless waste.

Soon i will be forced t learn how to assemble big battery myself, but tat seems out of electroengineers capabilities when it comes to high drain..

I eould bebetter of making some form of massive earth battery combining charges from electrogenic bacteria, water milll, capruting wood fire to big bear battery and steam or other concersion but tht still is not for quick cross country travels.

Does somebody know aboutsome hyper mini gasoline motor thst can with gears make either low rpm or high rpm motor generate 7Kw, isnt 1kw like st leste here bike gasoline motor legal limit, so it should reach it, and they are effective, my friend told me he did like 1l on 100km, and if i imagine 4h full force of motor like that loaded on obe gear for speed to torque to get its optimal workload, then 1l could ve at least 3Kw?

One more month of this hardcore research and i will accept defeat, and start focusing on magical crazyness.

Like steam powered shi, leaver, gear sydtems to lift 50kg sand bucket to tree top by hand, simple human lift or drill with leaver and other and putting low rpm motor over many speed to torque gears for slow but heavy fall or static energy from skies..

Ohhhhhhhh!

We are a professional lithium battery supplier. We can customize the production of lithium batteries according to your national policies, business environment and climate conditions. Is there any need? Maybe we can have a more in-depth discussion.

Can the deep cycle 100 ah trolling motor battery be charged on an AGM setting instead of lead acid setting?

What happens when the battery drains to 8v while charging and charges up to 12v off the charger? Lifep04 12v 50ah…using a 14.2v 20amp lifeP04 charger

I want to charge two parallel mounted LiPo4 12v / 140 Ah battery. What current do I need tot charge these batt's normally?

My battery has two sets of wires. One thick and the other is thin. What is the charging wires and the power out wires.