just out of curiosity why didn't you take your top level on the retaining wall from the previous retaining wall on the left - the 1-inch change in height looks weird.
Fantastic job as always mate π one look at this video should be encouraging other customers to give you workππhope the back support is doing the trick π
I would not have to talk much for anyone to realise I am clueless. I have a question, what is better for cutting sleepers, a circular saw by going round each side or one of these crocodile? Alligator I think they are called saws used in this video at the start? I have the crocodile thing but not a circular, just wondered what is better and what is easiest as I have around 50 sleepers and want to make raised beds with them.
My only comment is that you really should use a tanking membrane behind the sleepers rather than let the soil touch them. They will be fine for a couple of years but they will start to rot on the back from never drying out and you can get mould growth on the fronts. As you have laid the sleepers down you will get a bit more longevity out of them. The membrane is dimpled so that earth is held 3 to 5 mm from the sleepers and water can drain down the back so they dry.
question, why did you lay the base sleeper in concrete? Wouldnt that accelerate the rotting in the base sleeper. I have a job coming up where i was thinking of using chippings/shingle to sit the base sleeper on to enable drainage prolonging the life of the sleeper. Please advise which would be the best method
Thanks for the video - very helpful. Did you fix the base sleeper for the wall to the concrete? If not is the concrete bed enough to stop the wall from being forced over?