I have 32 tires to do, and friend's tires, so I pulled the trigger on a tire machine and balancer combo.  Just makes sense.  Now I can rebalance at half tire life at MY convenience!!!  Thanks for your video!!!  🎉❤🎉

I had Wal-Mart refuse to take a nearly-new tire off my car and put it on a spare rim (the other 3 tires were pretty well worn out).  $2,400 later I am the new owner of a set of tire-changing equipment 🙃

Again today I went to buy a set (2) of T/A radials, to the only place in town that had them. The price for the tire was good but the mounting was expensive and "I brought the tires with them off the car already" $30 per rim.
Plus they said I had to leave the two wheels there until the next day, he said our technicians are busy. "What" . So I purchased the tires only and walked out.
Now I'm sitting here still thinking on buying the machines, last  8 months would have saved me $360.

Good video. Ive got my machine coming on the 16th and am excited.

Great instruction. Thank you.

Awesome video

I can confirm, I have the same machine it balance perfect. I have removed tire from machine. I have placed it back on you get 00 set machine up and do all 4 if you have same rims.

Thanks for making this video,  I'm sold on the aluminum S feature.  I have a Porsche 911 996.1 that was running 225 40 18 performance tires  . Unfortunately I have 5 miles of country/gravel road, so the low profile tires ran like a lumber wagon.  I swapped for a set of 205/60 16's in a touring tire.The extra sidewall and going to a touring vs a performance tire made a huge difference in the ride.  Obviously there's some performance loss; but works fine for how I drive..  Unfortunately with the 16" rims the brake calipers are so large the sticker weights, if place in the caliper path, will be shaved off by the caliper.  From what I can tell this machine will allow me to designate where I want the weights to be within the wheel barrel.    Regards from Nebraska.

THE TRUE TEST --- After the wheel/tire is balanced, remove the assembly then re-install it in a different orientation on the cone and flange and re-spin it. It should still show balanced and not call for more weight. Aside from a mounting error (assuming you mounted it correctly both times), this will check the repeatability of the balancer. Please do a video on that to test this budget balancer! Or, you folks out there, try it on yours and leave comments on your results.

Thank you for making this video! I was going to throw a brick at this thing!!

Can you do motorcycle tires on this machine?

You are the first video I have seen where you let the machine do all the inputs with the arm. The machine came with a large caliper to measure, so now I am a little confused. Also I noticed my machine has no visible spring and most videos show the cone being put on after the wheel on the outside. Did your machine come like that ? Excellent video, today will be the first time I use it as I just got it mounted. Thanks

I was looking at this and the mount/dismount machine that they have as a package deal. I have 6 pickup trucks and I already have a mobile tire service truck but for that truck 90% of our work are big truck tires. Might be able to expand to light duty if I could get a reliable dayshift person.

Nice pile of lead, and notice the sheathing is not OSB plus the 12g wire 👍

Did you lag machine down

My garage floor is tilted 2-3 degrees, would it work or do I have to use a shim to level it?  My concern is would shims might throw off balancer due to vibration.

Good, clear to understand video.  Thank you!  Just got mine delivered today.  Came well packaged, put it together, pretty simple.  Only thing I noticed is mine (also a Kt B760) doesn't have a spring on that spindle the rim slides onto.  My hub centering rings would just slide up to the large round part of that spindle hub, then I guess a wheel, then the threaded spin tightening lock.  Does the 760 balancer come with a spring?

Have you had any issue getting large wheels to center, have any tips?  Ive done two sets of car tires no problem, but cant get 18" silverado wheels to not wobble.

So you dont need to enter wheel diameter in ALUS ?  thks for reply

The only reason I want a machine is I feel that, what the tire shops are charging for labor.  
I was going to buy a set of 4 on labor day sale from a well known tire shop,  to get the sale price $510.00 with tax for the tires but a + $300.00 for mounting balancing mandatory warranty and disposal  Total $810